How to make a dresser look like wood carving, the DIY way. I discovered a way to make a plain dresser look like it was wood carved, the product I discovered is Wood Icing™ . I stumbled across this product on the internet and was so excited to try this out on my boring plain dresser drawer fronts. I love this product and how it transformed my dresser drawers.
This post contains some affiliate links. Click here for my full disclosure policy.
I purchased 2 dressers from Goodwill that were plain and boring and I had no idea at the time what I was going to do make them pretty. Once I started to have ideas, I discovered the Wood Icing™ and knew this product would be the answer for these dressers.
I was so excited to start this project but the weather has been damp and cold and was preventing me from working in my garage, so I decided I would start the dresser drawers and bring them in the house. See how plain these are. The dressers were solid wood and in good shape, so I could not pass up the deal in spite of boring.
I started by priming the drawers. If you are using a chalk paint, you can skip this step. I decided to use Modern Masters paint in Champagne, and they recommend priming before painting. The next step was to paint on 2 coats of my base paint (Champagne).
I would recommend applying the base coat before applying the wood icing product, so you will have a uniform color all around the edges of the product.
Now the fun begins! Place your stencil on your project and secure by using a spray adhesive or securely taping your stencil so it does not shift while you are applying the texture paste. I used the Micah Classic Panel from Royal Design Studio for my stencil.
Apply a generous amount of the texture paste over the stencil. Using the “off-set knife” at a slight angle, evenly remove the extra texture paste. You can place the scraped off texture paste back into the jar. Once you have the texture pasted smoothed and even, carefully remove your stencil. I would recommend wiping off the remaining paste from the stencil with a baby wipe, so you are not rinsing all the product down your drain.
Let the texture paste dry completely, overnight. Use a medium grit sandpaper and sand over the pattern to smooth out any peaks and rough surfaces. Apply 2 more coats of paint over the design. The great thing about this product is it can be stained. You could use it on wood furniture and stain it to match your wood piece. The possibilities are endless!
I applied furniture glazing in black over the painted design. I sealed the drawer front before applying. Usually, when using a light color paint and a dark glaze, sealing may be required to give the glaze a longer working time. This glaze has a quick dry time, so this was needed for this piece. I used a small slightly damp sponge to apply the furniture glaze, applying on the edges and over the raised design. I can’t wait to finish the dresser frame and share the completed project.
Stop over to the Wood Icing™ site and blog to see the great project ideas. They also have a great selection of colors in the furniture glazing along with fissure size and other products. I will be using this on more decorative pieces as well as plain boring furniture.
Here are a few other embossing creams that I have used and would recommend.
Make sure you take my FREE Workshop – How to Prep Furniture Workshop by visiting my online painting workshop.