I love to repurpose construction glass blocks into a great night-light or a holiday decoration. I chose to repurpose the construction blocks over buying the plastic ones from the craft store. I feel it serves a greater purpose by recycling instead of buying new. I have several blocks that I have purchased from various garage sales or that my neighbor had given me (Thanks, Megan). I want to share a step by step tutorial on decorating glass blocks.
This post contains some affiliate links. Click here for my full disclosure policy.
Construction Glass Block
1/2 inch diamond hole saw
Gilding Adhesive I can’t seem to find the original adhesive I used for these but have switched to Wunda Size. I now use Wunda Size for all my craft adhesive needs, including my decoupage projects.
Clear 20-Bulb Light Set with White Cord
various decorations for outside of the block
Step 1: Drill a hole in the side of the block with a 1/2 inch diamond hole saw. This is a type of saw to cut glass.
Tip: Place the glass block in a sink so you can run a steady stream of cold water over the block and the drill. This keeps the drill and the glass cool, which prevents cracking of the glass. I have cut(and broke) my fair share of blocks and wine bottles and I have found the cold water is the trick.
Step 2: Rinse the inside the block, rinse as much of the residue out from the inside of the block. It takes a long time for the inside of the blocks to dry. Tip: Bake the block in the oven at 170 degrees for 2 hours. The inside of the block will be completely dry after baking and letting cool.
Step 3: Squirt a fair amount of magic bubble liquid in the inside of the glass block, turn and shake the block until all sides have been evenly coated with the liquid, drain any extra liquid.
Step 4: Pour glitter of your choice into the glass block. Shake and turn the block until all sides are evenly covered. Tip: Use a small funnel to pour the glitter into the small opening of the glass block.
Step 5: Place glass block into oven and bake @ 170 for another 2 hours, let cool completely.
Step 6: Insert light string into the opening of glass block. Tip: TI test the lights before inserting into the glass block.
Now you are ready to decorate the outside of the glass block.
Step 7: Clean the outside of glass block with a cleaner to remove dirt and fingerprints.
Step 8: Glue the metal glitter ornament(or decoration of your choice) on the glass block surface, let dry.
Step 9: Seal the block with Mod Podge to seal all the glitter from metal ornament and to give extra protection to the outside of the block.
Step 10: Wrap ribbon around outside of the block, tie at the top. Make a pretty bow and place at top of block.
I have made various versions of lighted glass blocks, and I want to share them with you.